Sherline Stepper Motor W/ Plug

• Sherline Stepper Motor w/ Plug
• Enables easy manual control with dual shafts
• Ensures secure attachment with set screws
• Simplifies setup with 6 prewired leads
• Reaches up to 530 RPM
• Operates at 3.2 V DC, 2 A

The Sherline Stepper Motor w/ Plug is a high-quality component designed for those assembling their own CNC systems or requiring additional motors. This motor is equipped with dual shafts, allowing for manual control via a handwheel if desired. The shafts are engineered with flats to accommodate set screws, ensuring secure attachment and easy removal when used with Sherline motor mounts. This feature is particularly beneficial for maintaining the integrity of the shaft surface during coupling removal.

The motor is prewired with six wire leads that connect seamlessly to Sherline’s linear or rotary motion controllers, facilitating a straightforward setup process. This design eliminates the need for a separate computer or driver, streamlining the integration into existing systems. The motor’s compatibility with Sherline’s CNC systems and driver boxes is enhanced by the inclusion of pre-wired cables with a 5-pin plug, ensuring a hassle-free connection to the appropriate axis.

Note: Ensure proper handling and installation to avoid damage to the motor or connected components.

• 1x Sherline Stepper Motor w/ Plug

PDF Files

• Frame size: NEMA #23
• Shaft: 1/4″ diameter, dual shafts
• Holding torque: 0.775 N.m
• Torque: 7.9 kg-cm
• Torque: 109.71 oz/in
• Torque: 6.856 in/lb
• Maximum speed: 530 RPM
• Voltage: 3.2 V DC
• Current: 2 A
• Step angle: 1.8° (200 steps/rev)