RMD X Series BLDC Actuator, 6:1 Planetary Reduction, RS485 Communication, 7 N.M Peak Torque Wo/ Brake

• MyActuator RMD-X6 1:6 RS485
• Features a high-quality reducer ratio of 6:1
• Operates at a powerful nominal power of 70 W
• Offers impressive motor efficiency of 70%
• Can handle substantial payloads in axial and radial directions
• Designed to operate in a wide temperature range of -20 to 55 °C

The MyActuator RMD-X6 1:6 RS485 is a high-quality product that features a reducer ratio of 6:1 and an input voltage range of 24-48 V. It is capable of reaching a maximum no-load speed of 240 rpm at 24 V, with a nominal speed of 190 rpm. The device operates at a nominal current of 4 A and a nominal power of 70 W, with a nominal torque of 3.5 N.M.

The motor efficiency of this product is approximately 70%. It is equipped with a wire connect interface and a phase-to-phase inductance of 0.19 mH. The speed constant of the device is 60 rpm/v, and the torque constant is 0.88 N.M/A. It can handle an axial direction payload of 775 N.M and a radial direction payload of 1250 N.M.

The rotor inertia of the MyActuator RMD-X6 1:6 RS485 is 800 gcm², and it has 14 pole pairs. The weight of the motor is 335g. It is designed to operate within a temperature range of -20 to 55 ℃, and the backlash is 5 arc min.

• 1x MyActuator RMD-X6 1:6 RS485

• Reducer Ratio: 6:1
• Input Voltage: 24 – 48 V
• Maximum No-load Speed: 240 rpm at 24 V
• Nominal Speed: 190 rpm
• Nominal Current: 4 A
• Nominal Power: 70 W
• Nominal Torque: 3.5 N.M
• Motor Efficiency: 70%
• Line Resistance: 0.33 Ω
• Wire Connection: Y
• Phase to Phase Inductance: 0.19 mH
• Speed Constant: 60 rpm/v
• Torque Constant: 0.88 N.M/A
• Axial Direction Payload: 775 N.M
• Radial Direction Payload: 1250 N.M
• Rotor Inertia: 800 gcm²
• Environment Temperature: -20 ~ 55 °C
• Backlash of Gearbox: 5 Arc min
• Motor Weight: 335 g